This
flush mounted sink and stove combination unit features a one
piece installation. It has two integrated glass lids, is all
stainless steel construction, with a straight rear but curved
front.
Length is 840mm x width of 440mm.
This is a compact unit that provides sink, drainer
and stove in the one unit. You have a choice of a cold water
tap or a hot and cold water tap in this model. The
tap and handle fold down so the sink lid adds extra bench space
when not required as a sink.
Stove burners are all fitted with flame safety
switches, so if the flame gets blown out the gas stops.
Clamps are included to install the unit in the
bench top. The tap has a 300mm flexible hose with a 1/2 male
BSP thread. Sink accepts a 25mm waste.
The stove has a 1/4 inch BSP female fitting.
A male 1/4" BSP
adapter to either 1/4, 5/16 SAE would normally be used to attach
to gas pipe work. See a complete list of fittings with compatible
thread, by Clicking the image below.
| Features |
Glass lid |
|
Stainless steel finish |
|
Hot and cold OR cold
only tape |
|
Flame failure device |
|
