PRIVACY ROOM CS

Suitable for all models of Caravanstore from 04 version. The new enclosures Privacy Room CS are specially designed for the Fiamma Caravanstore and are suitable for all models from version 04. Standard delivered with the new Easy Clip CS aluminium profiles composed of two pieces that ensure secure fastening.

Easy installation side panels are provided with big windows that can be opened, equipped with mosquito nets and aluminium pegs. The front panel slides in the front rail of the roller tube and thanks to the auto-lubricant zippers it’s easy to fasten the lateral panels. The windows are provided with elegant curtains. The door can be moved onto the left or right-hand side.
The best solution for your Caravan.

Item-No. Description Height from ground Awning length Extension Net weight 05258-10- PRIVACY-ROOM CS 255 cm. 240-260 cm 255 cm 225 cm 23 kg 05258-11- PRIVACY-ROOM CS 280 cm. 240-260 cm 280 cm 225 cm 23,3 kg 05258-12- PRIVACY-ROOM CS 310 cm. 240-260 cm 310 cm 225 cm 23,5 kg 05258-13- PRIVACY-ROOM CS 360 cm. 240-260 cm 360 cm 225 cm 24 kg 05258-14- PRIVACY-ROOM CS 410 cm. 240-260 cm 410 cm 225 cm 24,5 kg 05258-15- PRIVACY-ROOM CS 440 cm. 240-260 cm 440 cm 225 cm 25 kg
The height from the ground (A) must be from a min. of 240 cm. to a max of 260 cm. Standard delivered with Easy Clip CS, Curtains Kit Oslo, Pegs and Elastics Kit and Mega Bag. *n. 1 Caravanstore Support Leg standard delivered.
Exclusive to FIAMMA - PRIVACY ROOM CS With the Easy Clip CS the side panels of the privacy room are quickly and easily joined with the fabric of the awning. Sturdy but light weight it allows an easy mounting of your awning. This new patented system uses the sandwich technology and is made of anodized aluminum. It is delivered with two vertical rafters that are fixed between the side walls and the vehicle wall. When closed the set of tent pegs takes up only 120 cm. Easy Clip is standard delivered with Privacy room CS; it is however possible to buy it separately.

Sturdy "do it yourself" fixing system
for the side panels to suit Fiamma awnings.

These are NOT required for NEW Fiamma privacy enclosure. These easy to use RAPIDSET telescopic aluminium poles are 30mm diameter and extend to 2.8 metres long.

They fit from the Awning case, to the front bar corner and provide the rigid top corner rail that allows the roof to be clipped to the top of the wall with the 10 fabric fastening rings.
This item is for a complete set .

FIAMMA New Clip System:
Now independently available for retro fitting to ealier Privacy rooms.

The new Fiamma 'Clip System' guarantees a 100% water tight seal between the awning canopy fabric and the Privacy Room side walls; this is achieved using the new Clip System. The Clip System is effectively a clamping system, with an upper and a lower section that clamp around the awning roof fabric. The Clip System also incorporates a 'C' channel, which allows the side panel to fit into, once this has been fitted the roof fabric clamping procedure begins.

Because the Clip System is very strong, there is no need to use the 'Rapid Set' (as with previous models) to support the side panels, this reduces set-up and packing away times and the Privacy's pack size! Complete or partial installation in a couple of minutes with the front and side panels connecting via self-lubricating zips. Supplied with pegs, ladder bands, guy-lines, instructions and a carrying bag (not the Megabag).

The length will need to be cut with a hacksaw (using supplied template) for all but the F45i models. Also does not fit the older blue & grey Privacy unless the sides are DIY modified.

Optima Tension rafter and Centre Support

These rafter and centre supports are recommended for all awnings over 18' in the length.

Supports and stabilizes the awning - open or closed

Keeps canopy tensioned
Provides ground support when the awning is in the open position
Easy to mount and operate
Completely self-storing
Fits any brand of automatic roll-up awning
Storage cradle lifts and supports the rolled-up awning for travel

A&E OptimaTM Tension Rafter System Includes:
Self-adjusting Tension Rafter/Storage Cradle
Center Ground Support

How it works
At around the centre position of the awning, a permanent bracket is mounted just under the awning roll - this holds the awning up during travel to prevent sag. At the outside end of this bracket, hangs the rafter and during travel, the bottom end clips to a bottom bracket that must be mounted at least 69" or 1750mm below the bottom of the awning roll.

When the awning is extended, the bottom of the rafter is released, and pivots up to join the awning roll that is now in the fully open position. The rafter has a tension handle which puts tension on the roll from the top side of the RV and takes out flap as well as sag toward the RV.

The rafter then has a second stage (can be left in place if not required) that pivots down from the end that has just been placed into the awning roller. This becomes an adjustable vertical leg to help support the roller. It can be pegged to the ground if required.

It is best to position the centre rafter away from doors or windows that may need to be opened when the awning is closed, however the bottom bracket may be released at anytime to pivot the rafter up to gain access or open doors

Fiamma Awning Tie Down Kit

Added security for your awning. This kit allows the awnings to have additional tie down points in the case of windy weather, to protect your awning.

Should not be used for extended periods as it may cause wear or leakage to the awning.

Kit contains 11metres of heavy duty webbing, 2 x zinc coated corner pegs, spring with adjustable fastner.

A new, larger version of the original DeFlapper with wider grippers to keep awnings even more stable in wind or rain. Patented.

Screw included bracket to top of caravan or pop top under awning		End pushes into 3/8" hole you drill into awning roll
Tension curved rafter to hold in place		Rafter reduces flapping and enhances water run off. One or more recommended

At last a cost effective way of stopping that rollout awning sagging and flapping. SUPEX have made an easy to fit adjustable curved roof rafter which can be added to an existing awning in just seconds.

All you need to do is drill three holes, and screw in 2 screws.

The white powder coated aluminium rafter is curved just the right amount to keep tension on the awning fabric. Smaller awnings need just one while larger awnings would benefit from 2 or even more. They take just seconds to place in position, and can even be used to hang light items off the ground, like drying that towel off. They will fit most rollout awnings sold in Australia and fold down to 1.5m and extend to 2.5m.

It includes the wall bracket.